There are a variety of elements that affect printing speed but it’s important to maintain the speed of your printer. For this, you should test various options with the configuration of HP Printer.
To increase performance of the printer first you must perform the fundamental troubleshooting steps below that are offered in the following article by Print Align Experts:
Step 1. Make sure the printer is reset:
Start by setting your printer by following the steps in the following steps:
- When the printer is powered on, take the power cord from the printer.
- Then, disconnect the power cord from the power source.
- Give yourself a minute or two minutes.
- Connect the power cord to the wall outlet and the print.
Important note It is suggested to connect direct into the wall outlet.
Step 2: Use a different USB cable
If necessary, you may use a different USB cable to solve the printing problems. A alternative USB cable could help get back to the speed you want from your printer. Check if you’re HP Printer isn’t working.also visit printer repair dubai.
If you are unable to do so, follow the next step below.
Third step: Review the preferences of the printer
The settings play an essential function in the performance that your printer can perform. Make sure you select the appropriate kind of paper for printing. Additionally, selecting the highest quality, which can greatly slow your printer. Therefore, it is recommended to select a plain-colored paper that has the quality selected as Draft and Normal for greater speed. To alter the preferences of your printer you can follow the steps below:
know about customer service technician.
- The first step is to go to Printers, and then select Printers and scanners from the listing of the results.
- Then, click on your printer and then click manage..
- Select Printing Preferences.
- Then, select the paper and/or Paper/Quality
- In the Type menu, choose the Paper from the Type menu, then select Plain Paper in the field, and then verify whether plain Paper is selected.
To alter the print quality
Within the HP Inkjet and LaserJet printers:
- Select The Print Quality field and then choose.
- Normal or Draft from the options.
HP Laser Printers:
- Click on the Graphics tab, then select Standard from the Quality field.
- Click Ok or apply to preserve the modifications.
- Then, try printing on a brand new piece of paper.
If the issue continues If the issue persists, proceed on to step.
4. Print using both cartridges
This is because printing with just one cartridge, it will result in slower printing speeds. Some printers allow or allows printing with just one cartridge.
If you can, you can try both printers and verify that they’re properly set up. If needed you need to replace the cartridges that are empty. If the issue persists, attempt to resolve the issue using this next procedure.any other issue related to printer visit printer repair sharjah.
Step 5 Reinstall the print driver:
Remove and install the print driver and the software, Download HP Printer Driver and install the latest printer driver to speed up the speed of printing
- On using the Search bar, select Add or remove programs.
- Select the printer you want to use and select Uninstall.
- After uninstalling, download latest drivers from the official website of the manufacturer, then follow the on-screen directions to Uninstall.